Table of Contents
Advertisement
Before charging, be sure to empty all liquid contents and
dry thoroughly, to avoid damage to your appliance.
Optimising the suction force
In order to keep the suction force optimised, the fi lters must be
cleared regularly during use.
Emptying and cleaning the product
Removing the dust bowl and fi lters (fi g. F & G).
Warning! The fi lters are re-usable and should be cleaned
regularly.
Press the bowl release button (2) and pull the dust bowl
(3) straight off.
While holding the dust bowl over a bin or sink, pull out the
fi lter to empty the contents of the bowl.
To replace the dust bowl, place it back onto the handle
until it "clicks" fi rmly into position.
Warning! Never use the appliance without the fi lters.
Optimum dust collection will only be achieved with clean
fi lters.
Foam insert (fi g. H) (WDC units Only)
Place the foam insert (12) into the centre of the wet/dry
defl ector (13).
Warning! Never use the appliance for wet applications without
the water defl ector and foam insert fi tted.
Pre-fi lter (fi g. I) (NVC units Only)
The Filter and pre-fi lter can be separated to allow better
cleaning.
Twist the pre-fi lter (11) in an anti-clockwise direction and
lift from the fi lter (10).
Warning! Never pick up wet applications with these units.
Cleaning the dust bowls and fi lters
The dust bowls and fi lters can be washed in warm soapy
water.
Make sure that the fi lters and the dust bowl are dry before
re-fi tting.
Replacing the fi lters
The fi lters should be replaced every 6 to 9 months and
whenever worn or damaged.
Replacement fi lters are available from your BLACK+DECKER
dealer:
Maintenance
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with
a minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
(Original instructions)
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
switch off.
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Protecting the environment
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Voltage (V)
Battery
Weight (Kg)
Charger
Input Voltage (V
)
ac
Output Voltage (V)
Current (mA)
Approx charge time
Guarantee
Black & Decker is confi dent of the quality of its products
and offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
ENGLISH
NVC115JL (H1)
NVC215W (H1)
NVC115W (H1)
NVC215WA (H1)
NVC115WA (H1)
NVC220WC (H1)
WDC115WA (H1)
WDC215WA (H1)
3.6
7.2
Li-Ion
Li-Ion
0.53
0.67
SSC-040015EU/
SSC-080015EU/
S003BDV0500015
S003BEV0800015
100 - 240
100 - 240
4
8.25
150
150
10 (hours)
10 (hours)
9
Advertisement
Table of Contents
