What To Do If - AEG 102 D Installation And Operating Instructions Manual

What to do if

If your appliance fails to work properly please carry out the
following checks.
Symptom
The cooker hood will not start...
The cooker hood is not working
effectively..
The cooker hood has
switched off during operation...
If after all these checks, the problem persists, contact your local
Service
Force Centre, quoting the model and serial number.
Please note that it will be necessary to provide proof of
purchase for any in-guarantee service calls.
In-guarantee customers should ensure that the above checks
have been made as the engineer will make a charge if the fault
is not a mechanical or electrical breakdown.
14
Solution
Check that:
The hood is connected to
the electricity supply.
Check that the fan speed
control is set to 1, 2 or 3.
Chec k that:
The fan speed is set high
enough for the task.
The grease filters are
clean.
The kitchen is adequately
vented to allow the entry of
fresh air.
If set up for recirculation,
check that the charcoal
filter is still effective.
If set up for extraction,
check that the ducting and
outlets are not blocked.
The safety cut-out device
has been tripped.
Turn off the hob and then
wait for the device to reset.
If the hood has been
installed below the heights
indicated in the installation
instructions the motor will
cut-out frequently which
will damage the hood.