Tips For Using Hhp400 Suite - Omega HHP460 User Manual

M20013 REL-0000 (2103)

Tips for using HHP400 Suite

USB cable and your computer
For use only in non-hazardous locations (safe locations)
Connect the USB cable to your Smart Manometer and to your
computer to configure any sensors you wish to include.
Use only the supplied USB cable when you connect to the USB
port.
Close HHP400 Suite first, then turn off your Smart
Manometer
Do not turn off the power on the Smart Manometer while it is
communicating with HHP400 Suite. The Smart Manometer
displays dashes and the words
is communicating with a Smart Manometer or sensor.
Close HHP400 Suite first, disconnect the USB, and turn off
▪
your Smart Manometer.
As long as
▪
suspended.
User Manual HHP460 Smart Manometer with Altimeter & Air Speed Test
USB ACTIVE
remains visible, Auto Off is
USB ACTIVE
while HHP400 Suite
38 of 72