Bosch 0 607 453 4 Series Original Instructions Manual page 20

OBJ_BUCH-1585-005.book Page 20 Thursday, October 20, 2016 6:49 PM
20 | English
Noise/Vibration Information
0 607 ...
Measured sound values determined according to
EN ISO 15744.
Typically the A-weighted
noise level of the pneumatic
tool is:
Sound pressure level L dB(A)
pA
Sound power level L dB(A)
wA
Uncertainty k dB
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 28927:
Screws:
2
a m/s
h
2
K m/s
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN ISO 11148 and may be used to compare one
pneumatic tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the pneumatic tool. However if the pneumatic
tool is used for different applications, with different accesso-
ries or insertion tools or is poorly maintained, the vibration
emission may differ. This may significantly increase the expo-
sure level over the total working period.
An exact estimation of the level of exposure to vibration
should also take into account the times when the pneumatic
tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintaining the pneu-
matic tool and the accessories, keeping the hands warm, or-
ganisation of work patterns.
1 609 92A 37M | (20.10.16)
Declaration of Conformity
We declare under our sole responsibility that the product de-
... 453 4.. ... 461 4..
scribed under "Technical data" complies with all applicable
provisions of the directive 2006/42/EC including its amend-
ments and is in conformity with the following standards:
EN ISO 11148-6.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ECS,
81 82
70538 Stuttgart, GERMANY
92 93
Henk Becker
3 3
Executive Vice President
Engineering
< 2.5 < 2.5
Robert Bosch Power Tools GmbH
1.5 1.5
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
Technical Data
These pneumatic tools belong to the CLEAN product line.
Through its oil-free operation and reduced air and energy con-
sumption, Bosch's CLEAN technology is operator-ergonomic
and helps save the environment.
Operation with air containing oil is also possible.
consumption optimized – C
lubrication-free
ergonomic
air tool
noise reduction
Helmut Heinzelmann
Head of Product Certification
PT/ECS
– L
– E
– A
– N
Bosch Power Tools