Rear View - NEC Express5800 Series User Manual

Chapter 1 General Description
4.3

Rear View

・2.5-inch HDD cage (rear) (Option) configuration
(1) 1st riser card (option)
Slots for installing full-height PCI cards.
(2) Serial Port connector (option)
A connector for connecting serial interface
devices. this cannot directly connect to a
network line.
(3) 2.5-inch HDD cage (rear) (option)
Used for installing 2x 2.5-inchSAS/SATA drive.
(4) Power Supply Unit (non-redundant)
(Selection option)
A power supply for supplying the DC power
to the server.
(5) Power Supply Unit1 (Power Supply Slot 1)
(Selection option)
A power supply for supplying the DC power
to the server.
(6) Power Supply Unit2 (Power Supply Slot 2)
(option)
2nd Power Supply Unit.
(7) LAN connector 2
A connector for connecting a network
(1000BASE-T)
(8) LAN connector 1
A connector for connecting a network
(1000BASE-T)
28
Redundant.
Express5800/R120h-2E User's Guide
4. Names and Functions of Parts
(9) Display connector
A connector for connecting a display.
(10) management LAN connector
A connector which supports
1000BASE-T/100BASE-TX/10BASE-T.
This port cannot be used as standard LAN port.
This port is use for only iLO.
(11) USB3.0 connector
Connectors for connecting USB 3.0 interface
devices.
(12) LOM card (optional LAN3, LAN4)
This is an optional LOM card that can be
connected directly to the mother board.
• N8104-193 1000BASE-T connection LOM
card (2ch)
• N8104-194 10GBASE connection LOM card
(SFP+/2ch)
• N8104-195 10GBASE-T connection LOM
card (2ch)