Installing Network Fax Utilities - Toshiba e-Studio2000AC Software Installation Manual

Installing Network Fax Utilities

0.
Perform installation corresponding to your Windows computer.
To perform installation, you must log onto Windows with the "Administrator" account; this enables the installation
and uninstallation of client software.
Insert the Install Disc into the disc drive.
1
If Software Installer does not automatically start, use the Explorer to open the e-STUDIO folder in the Install Disc
and double-click "Setup.exe".
Select [I agree to the terms of the License Agreement.] and click [Next].
2
To change the display language, select the desired language from the [Select Language] box.
Click [Fax Driver].
3
Confirm the list of the software to install and click [Install].
4
When you want to verify and/or change the SNMP settings to find the target TOSHIBA MFPs, see step 4 in the
following section:
 P.26 "Procedure for Recommended Installation"
Since the subsequent procedure is the same as that for printer driver installation, the steps are omitted. See the
following pages according to the connection environment.
 P.39 "Raw TCP/LPR printing"
 P.45 "SMB printing"

Installing Network Fax Utilities 141