D-Link DCS-4605EV User Manual page 53

Section 3: Configuration
Event
Create and schedule up to three events with their own settings here. After making any changes, click the Save button to save
your changes.
Enter a name for the event.
Event name:
Toggle this to activate this event.
Enable this
event:
Set the priority for this event. Events with higher priority will be executed
Priority:
first.
Specify the delay time before allowing this event to be triggered again. This
Delay for...:
is used for both motion detection events and event triggers.
Trigger
Selecting this will trigger the event when motion is detected during live
Video Motion
video monitoring. Make sure you have enabled motion detection and
Detection:
specified what part of the image to monitor for motion. For more details,
refer to "Motion" on page 57.
Selecting this will trigger the event in specified intervals. The trigger interval
Periodic:
unit is in minutes.
Selecting this will trigger an event when the system boots up.
Camera Boot:
Selecting this will trigger an event when the camera's connection to the
Network Lost:
network is lost.
Selecting this will trigger an event when tampering has been detected. For
Tamper
more details, refer to "Tamper" on page 59.
Detection:
D-Link DCS-4605EV User Manual 53