D-Link DCS-4605EV User Manual page 40

Section 3: Configuration
In this section, you may configure the video image settings for your camera. All changes in the Image Settings section will be made immediately.
For the other sections, after making any changes, click the Save button to save your changes.
Image
This will mirror the image horizontally.
Mirror:
This will flip the image vertically. When turning Flip on, you may want to consider
Flip:
turning Mirror on as well.
Enabling Digital Image Stabilization (DIS) will slightly reduce the viewing area of
DIS:
the camera in order to provide image stabilization. This is useful when the camera is
mounted in a place that may be affected by wind or vibration.
Select the frequency used by your power lines to avoid interference or distortion.
Anti-Flicker:
If the Anti-Flicker is set on 50 Hz, the max. frame rate option will be 25fps; If Anti-
Flicker is set on 60 Hz, the max. frame rate option will be 30fps.
Use the drop-down box to change white balance settings to help balance colors for
White Balance:
different environments. You can choose from Auto, Outdoor, Indoor, Fluorescent,
and Push Hold. If you choose Push Hold, hold a white card or grey card in front of
the camera, then click the Save button to set the camera's white balance.
Changes the exposure mode. Use the drop-down box to set the camera for Indoor,
Exposure Mode:
Outdoor, or Night environments, or to Moving to capture moving objects. The
Low Noise option will focus on creating a high-quality picture without noise.
You can also create 3 different custom exposure modes. Max Gain will limit the
brightness of the exposure.
This setting controls the amount of noise reduction that will be applied to the
Denoise:
picture.
This setting controls the amount of 3D denoise that will be applied to the picture. 3D
3D Denoise:
denoise reduces the amount of image noise when viewing a low-light environment.
D-Link DCS-4605EV User Manual
Image Settings
40