Advertisement
TG1311_1313SA(e).book Page 5 Monday, September 29, 2008 11:18 AM
Charger
Available for:
KX-TG1313
The charger can be mounted on the wall, if required.
L Use only the supplied Panasonic AC adaptor PQLV209CE.
Hooks
(220–240 V AC, 50 Hz)
Note:
L Never install telephone wiring during a lightning storm.
L Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become disconnected.
During a power failure
The unit will not work during a power failure. We recommend connecting a
corded-type telephone (without AC adaptor) to the same telephone line or
to the same telephone line jack, if you have such a telephone jack in your
house.
Location
For maximum distance and noise-free operation, place your base unit:
− away from electrical appliances such as TVs, radios, personal
computers, or other phones.
− in a convenient, high, and central location.
Battery installation
Important:
L Use the supplied rechargeable batteries (Part No. HHR-55AAAB).
L When installing the batteries:
25.2 mm
− Wipe the battery ends (S, T) with a dry cloth.
− Avoid touching the battery ends (S, T) or the unit contacts.
− Confirm correct polarities (S, T).
L If the handset does not automatically turn on after installing batteries,
Screws
press {ih} for about 1 second, or place the handset on the base unit
(Not supplied)
or charger.
Insert the batteries negative (T) end first. Close the handset cover.
Preparation
5
Advertisement
