Cleaning The Spark Arrester - Yamaha YFM700RSE Owner's Manual

Hide thumbs Also See for YFM700RSE:
Table of Contents

Advertisement

1. Washer
15. Insert the air filter element into the air filter
case, and then tighten the wing bolt.
NOTICE: Make sure that the air filter ele-
ment is properly seated in the air filter
case. Never operate the engine with the air
filter element removed. This will allow un-
filtered air to enter the engine, causing
rapid engine wear and possible engine
damage. Additionally, operation without
the air filter element will affect the fuel in-
jection system with subsequent poor per-
formance
and
overheating.
[ECB00762]
1
possible
engine
8-25
16. Install the air filter case cover by hooking the
holders onto the air filter case.
17. Install the seat.
TIP
The air filter element should be cleaned every 20–
40 hours. It should be cleaned and lubricated
more often if the ATV is operated in extremely
dusty areas. Each time the air filter element main-
tenance is performed, check the air inlet of the air
filter case for obstructions. Check the air filter
case rubber joint to the throttle body and the rub-
ber joint manifold fittings for an air-tight seal.
Tighten all fittings securely to avoid the possibility
of unfiltered air entering the engine.
EBU27704

Cleaning the spark arrester

Select a well-ventilated area free of combustible
materials and make sure the exhaust and muffler
are cool.
1. Remove the tailpipe bolt.
8

Advertisement

Table of Contents
loading

Table of Contents