Carton Components - Brother DCP-7030 Quick Setup Manual

Getting Started
1

Carton components

1
Carton components may vary from one country to another.
Save all packing materials and the carton in case for any reason you must ship your machine.
Warning
Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep these
bags away from babies and children.
1 Automatic Document Feeder (ADF) (DCP-7040 and
DCP-7045N)
2 Control Panel
3 Face-down Output Tray Support
4 Manual Feed Slot
5 Paper Tray
CD-ROMs
For Windows
For Macintosh
The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the interface
you intend to use (USB or Network). Do NOT connect the interface cable at this time. Connecting the interface
cable is done during the software installation process.
USB interface cable
Please make sure you use a USB 2.0 interface cable that is no longer than 2 metres. When you use a USB
cable, make sure you connect it to the USB port of your computer and not to a USB port on a keyboard or non-
powered USB hub.
Network cable (DCP-7045N only)
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet
Network.
6
1
2
3
4
5
®
Quick Setup Guide
9
8
7
6
6 Front Cover
7 Power Switch
8 ADF Document Output Support Flap (DCP-7040 and
DCP-7045N)
9 Document Cover
AC Power Cord
(including Toner Cartridge)
Drum Unit Assembly