Certificate Authority Setup - Linksys AC1200 User Manual

10. For the parent domain, enter the domain you specified for the domain controller setup, and
enter the server's address for the IP address. Click Next.
11. If you don't want a WINS server, just click Next.
12. Select Yes, I want to activate this scope now. Click Next, then Finish.
13. Right-click on the server, and select Authorize. It may take a few minutes to complete.

Certificate Authority Setup

1. Select Start > Programs > Administrative Tools > Certification Authority.
2. Right-click Policy Settings, and select New > Certificate to Issue.
3. Select Authenticated Session and Smartcard Logon (select more than one by holding
down the Ctrl key). Click OK.
108