Checking The Shift Pedal; Brake Light Switches - Yamaha 2012 WR250R Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
dealer bleed the system before
operating the motorcycle. Air in
the hydraulic system will dimin-
1 ish the braking performance,
which may result in loss of con-
trol and an accident.
2
3
4
5
6
7
8
9

Checking the shift pedal

The operation of the shift pedal should
be checked before each ride. If opera-
tion is not smooth, have a Yamaha
dealer check the vehicle.
7-24
EAU44820

Brake light switches

1
(a)
1. Rear brake light switch
2. Rear brake light switch adjusting nut
The brake light, which is activated by
the brake pedal and brake lever, should
come on just before braking takes ef-
fect. If necessary, adjust the rear brake
light switch as follows, but the front
brake light switch should be adjusted
by a Yamaha dealer.
Turn the rear brake light switch adjust-
ing nut while holding the rear brake light
switch in place. To make the brake light
come on earlier, turn the adjusting nut
in direction (a). To make the brake light
come on later, turn the adjusting nut in
direction (b).
EAU22273
2
(b)