Panasonic AG-CPD10CRUP Operating Instructions Manual

Memory card video recording system

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Operating Instructions

Memory Card Video Recording System

AG-CPD10CRUP

Model No.

Car Use only

Before operating this product, please read the instructions carefully and save

this manual for future use.

ENGLISH

S0205N3097 -M

Printed in Japan

VQT0Q80-3

Table of Contents

Summary of Contents for Panasonic AG-CPD10CRUP

Page 1 Operating Instructions Memory Card Video Recording System AG-CPD10CRUP Model No. Car Use only Before operating this product, please read the instructions carefully and save this manual for future use. ENGLISH S0205N3097 -M Printed in Japan VQT0Q80-3...
Page 2 WARNING: • TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. • TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, KEEP THIS EQUIPMENT AWAY FROM ALL LIQUIDS. USE AND STORE ONLY IN LOCATIONS WHICH ARE NOT EXPOSED TO THE RISK OF DRIPPING OR SPLASHING LIQUIDS, AND DO NOT PLACE ANY LIQUID CONTAINERS ON TOP OF THE EQUIPMENT.
Page 3 CAUTION: In order to maintain adequate ventilation, do not install or place this unit in a book case, built-in cabinet or any other confined space. To prevent risk of electric shock or fire hazard due to overheating, ensure that curtains and any other materials do not obstruct the ventilation.
Page 4: Important Safety Instructions
Details on GPL and LGPL can be found in the GPL and LGPL sections of this manual. To obtain the source codes, go to the following home page. https://eww.pavc.panasonic.co.jp/pro-av/ The manufacturer asks users to refrain from directing inquiries concerning the source codes they have obtained and other details to its representatives.
Page 5: Table Of Contents
Contents IMPORTANT SAFETY LEDs and recorder status..23 INSTRUCTIONS......4 Factory default settings ...25 Features........5 Connector signals ....31 Configuration and included Troubleshooting .......34 accessories .........6 GPL ..........38 Options ........6 LGPL ..........41 Before use ........6 OpenSSL License .....45 Notes on handling ......8 Blowfish License ......46 Control reference guide ...10 DES License......46 Connections......14...
Page 6: Configuration And Included Accessories
“backlight compensation” and “IR enabled night recording” functions. Exclusion of liability Panasonic does not accept liability Use with specified application for any problems related directly or Use only the specified application indirectly to data loss or failure to...
Page 7 130 days you should format the P2 card. P2C032RG 508 files In no event will Panasonic be liable for any damages, including any incidental • or consequential damages, stemming from a failure to record data or from lost settings or data.
Page 8: Notes On Handling
Notes on handling • Do not insert any foreign objects Installation into the openings of the unit. • Install the recorder and camera • Do not attempt to modify the properly as described in the recorder, camera, or P2 card. installation manual, so that the •...
Page 9 Notes on handling (continued) • Do not disconnect the power cable Precautions when using while the recorder is operating. Be 16 GB or higher P2 cards sure to perform recorder shutdown • Use only one P2 card. If you insert a before disconnecting the cable.
Page 10: Control Reference Guide
Control reference guide Recorder front panel REC button ( ) READY LED Starts recording of video and sound Lights up when recording is to a P2 card. possible on a P2 card inserted in a P2 card slot (see page 23). STOP button ( ) BUSY LED Stops recording.
Page 11 Control reference guide (continued) Recorder rear panel VIDEO IN connector LAN port (Pin jack) This port allows a 100BASE-TX connection to a computer. Use the This is a composite signal input. supplied LAN cable. VIDEO OUT connector Camera cable connector (Pin jack) Use the supplied camera cable to This is a composite signal output.
Page 12 Control reference guide (continued) Recorder mount adapter 187.4 (7-3/8 ") Trunk mounting holes Spaces for center console mounting holes These holes are used to mount the In these spaces the holes can be recorder in the trunk. made to mount the recorder on the For details, see the installation center console.
Page 13 Control reference guide (continued) Camera front, rear, and top REC LED Zoom buttons Lights up during recording. Control the zoom function. The W The LED starts to flash when the button serves to zoom out and the combined remaining recording time T button to zoom in.
Page 14: Connections
Connections • To reduce the risk of fire or shock hazard, installation and wiring must only be performed by a professional installer. • To reduce the risk of fire, the red (BATT) and white (SIGNAL) wires of the power cable must be connected via fuses (5 A – 20 A) having UL Listing. •...
Page 15 Connections (continued) Computer (available separately) Others: Input signal lines White: Rec Tally output line Black: Connect to the negative terminal of the battery RS-232C: Connect to equipment with serial connectors External trigger cable (supplied) Video LAN cable (supplied) Input Output Camera cable (supplied) (line level) (mic level)
Page 16: P2 Card Insertion And Removal
P2 card insertion and removal Never open the cover or remove the P2 card while the P2 card is being accessed. Otherwise the data on the card may be lost or damaged, and the P2 card slot may become inoperative. (2) Insert a P2 card into the P2 Inserting a P2 card card slot and push it in until...
Page 17 P2 card insertion and removal (continued) (4) Close the cover. Removing a P2 card Return the cover to its original (1) Open the cover closed position and press the (see previous page). section marked PUSH (2) Raise the EJECT button. (3) Push the EJECT button so When you close the cover after that the P2 card pops out.
Page 18: Recording And Stopping
Recording and stopping • When recording is started by a Recording recording start trigger signal, the Recording can be started by one of the recorded video signal will always be following methods: the signal originating from the • Pressing the REC button on the recorder. camera unit, via the camera input •...
Page 19 Recording and stopping (continued) Stopping Recording can be stopped by one of the following methods: • Pressing the STOP button on the recorder. • Clicking the STOP button in the Toughbook- Arbitrator Front End Software. When recording is stopped, the post- recording function operates to ensure that material from a certain interval after the stop point is included in the...
Page 20 Recording and stopping (continued) REC button pressed STOP button pressed Write-protect switch (Recording starts) (Recording stops) The P2 card is equipped with a write- Time protect switch. If you set this switch to the PROTECT position, no data can be written to the P2 card and no Actual recording time existing file can be deleted.
Page 21 Recording and stopping (continued) Selecting the video source to record Audio sources when recording You can select to record from either The recorder can record up to two the camera cable input signal or the audio channels (L-CH and R-CH). Out VIDEO IN connector input signal on of the three audio input connectors on the rear panel.
Page 22: Camera Operation
Camera operation Zoom function Backlight compensation function The camera has the capability for When you press the backlight optical zoom (x22) and digital zoom compensation button, the backlight (x10). The zoom function is controlled compensation function is activated. with the W button and the T button. Each push of the button toggles the The maximum zoom factor is x220.
Page 23: Leds And Recorder Status
LEDs and recorder status The relationship between the on/flashing status of the indicator LEDs on the recorder and camera and the operation status of the recorder is shown in the table below. : LED lit : LED flashing : LED out LED status Recorder status READY BUSY...
Page 24 LEDs and recorder status (continued) The READY LED does not light if the Memory Card Video Recorder is not capable of recording. Recorder administrator settings can be changed from the Toughbook-Arbitrator Front End Software. • If recording is already in progress or if recording cannot be started when the REC button is pressed or a recording start trigger is activated via the GPIO/SERIAL port, the REC LED flashes for about 1 second.
Page 25: Factory Default Settings
Factory default settings The factory default settings are listed in the table below. To change any of these settings, use the Toughbook-Arbitrator Front End Software, but “18 IP Address” will not be changed. Item Value Description (Recorder related settings) Shift Shift Start 2005-01-01 Shift start date, time and day...
Page 26 Factory default settings (continued) 8 V-CH Video input Setting values1: Camera cable connector input 2: VIDEO IN connector input 9 AUDIO2 Audio input Setting values: AUDIO IN2 (For information on audio settings, see page 21.) 10 Pre Time Prerecord time (seconds) Setting values: 0 - 180 Audio Pre Enabled...
Page 27 Factory default settings (continued) OSD On/Off OSD On OSD enable/disable GPIO On Setting values: OSD OFF TimeDate On OSD ON, GPIO ON, TimeDate ON OSD ON, GPIO ON, TimeDate OFF OSD ON, GPIO OFF, TimeDate ON TIME-DATE Time/Date display format STYLE Setting values: ISO (ISO format) USA (USA format)
Page 28 Factory default settings (continued) R-Protocol Baud Rate 4800 Radar gun communication rate (bps) Setting value: 50 - 230400 Bit Length Communication word length (bits) Setting values: 8 Stop Bit Stop bits (bit) Setting value: 1,2 Parity Parity Setting values: ODD EVEN Delimit Delimiter...
Page 29 Factory default settings (continued) (Camera related settings) 1 ZOOM-LIM Maximum zoom factor Target Magnification Setting values: 22 - 220 (The values except 22 are multiples of 20.) 1 - 220 (Values from 1 to 22 are integers, and values of 40 and above are multiples of 20.) 2 AUTO ZOOM Target zoom factor when AutoZoom command is received Target Magnification...
Page 30 Factory default settings (continued) 7 Infra Red AUTO IR function auto switch/always ON/always OFF Setting values: AUTO (IR function is automatically switched on and off) ON (IR function is always on) OFF (IR function is always off) 8 IR-Level Level setting for IR auto switching mode Setting values: LOW HIGH 9 IR-Time...
Page 31: Connector Signals
Connector signals Camera cable connector Signal (recorder/female) number N.C. V_OUT BL_L AUTO_ZOOM_L REC_L GND (DC_IN) DC_IN N.C. GND (SHIELD) GND (V_OUT) GND (TxD/RxD) REC_LED_L GND (SHIELD) GND (SHIELD) DC IN connector Signal Cable color (recorder/female) number Black BATT SIGNAL White N.C.
Page 32 Connector signals (continued) GPIO/Serial connector Cable Signal Remarks (recorder/female) number color N.C. Serial Serial Serial Serial Serial Serial Serial GPIO Black GPIO1 Brown GPIO2 External trigger cable GPIO3 Orange (supplied) GPIO4 Yellow N.C. N.C. N.C. N.C. RS-232C N.C. N.C. Black Serial Brown GPIO5...
Page 33 Connector signals (continued) Camera cable connector Signal (camera/female) number GND (SHIELD) REC_LED_L GND (TxD/RxD) GND (V_OUT) DC_IN GND (DC_IN) REC_L AUTO_ZOOM_L BL_L V_OUT...
Page 34: Troubleshooting
Troubleshooting Before requesting service, check the points listed below. If the problem persists, contact your local Panasonic dealer. Recorder Starting up Power does not come on. • Check whether power cable is connected correctly. • Check whether a timer device is inserted in the Power gets turned off power supply for the recorder.
Page 35 Troubleshooting (continued) Recording Cannot start recording. (Check this with the Toughbook-Arbitrator Front End Software.) • Is a P2 card inserted? • Does the P2 card have sufficient free space? Check the free space with the Toughbook- Arbitrator Front End Software. Upload files and free up space.
Page 36 Troubleshooting (continued) Video is distorted or not (Check this with the Toughbook-Arbitrator Front recorded. End Software.) • Are camera and video monitoring equipment connected properly? • Are both the video input connector selection and the input selection made with the Toughbook- Arbitrator Front End Software the same? •...
Page 37 Troubleshooting (continued) Camera Starting up and during operating Power does not come on. • Is the camera cable connected correctly? Check this while referring to the installation manual. • Immediately after power-on or when switching Unusual sound is heard. to IR mode, a mechanical operation sound will be heard.
Page 38: Gpl
GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, Version 2, June 1991 DISTRIBUTION AND MODIFICATION Copyright (C) 1989, 1991 Free Software Foundation, Inc. 0. This License applies to any program or other work 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA which contains a notice placed by the copyright holder Everyone is permitted to copy and distribute verbatim saying it may be distributed under the terms of this...
Page 39 (continued) These requirements apply to the modified work as a even though third parties are not compelled to copy the whole. If identifiable sections of that work are not derived source along with the object code. from the Program, and can be reasonably considered 4.
Page 40 (continued) believed to be a consequence of the rest of this License. SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH 8. If the distribution and/or use of the Program is restricted ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER in certain countries either by patents or by copyrighted OR OTHER PARTY HAS BEEN ADVISED OF THE interfaces, the original copyright holder who places the...
Page 41: Lgpl
LGPL GNU LESSER GENERAL PUBLIC LICENSE holder. Therefore, we insist that any patent license Version 2.1, February 1999 obtained for a version of the library must be consistent with the full freedom of use specified in this license. Copyright (C) 1991, 1999 Free Software Foundation, Inc. Most GNU software, including some libraries, is covered 59 Temple Place, Suite 330, Boston, MA 02111-1307 by the ordinary GNU General Public License.
Page 42 LGPL (continued) data prepared so as to be conveniently linked with table used by this function must be optional: if the application programs (which use some of those functions application does not supply it, the square root function and data) to form executables. must still compute square roots.) The “Library”, below, refers to any such software library or These requirements apply to the modified work as a...
Page 43 LGPL (continued) than a “work that uses the library”. The executable is d) If distribution of the work is made by offering access therefore covered by this License. Section 6 states terms to copy from a designated place, offer equivalent for distribution of such executables.
Page 44 LGPL (continued) 11. If, as a consequence of a court judgment or allegation NO WARRANTY of patent infringement or for any other reason (not 15. BECAUSE THE LIBRARY IS LICENSED FREE OF limited to patent issues), conditions are imposed on CHARGE, THERE IS NO WARRANTY FOR THE you (whether by court order, agreement or otherwise) LIBRARY, TO THE EXTENT PERMITTED BY...
Page 45: Openssl License
OpenSSL License LICENSE ISSUES This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The OpenSSL toolkit stays under a dual license, i.e. both The implementation was written so as to conform with the conditions of the OpenSSL License and the original Netscapes SSL.
Page 46: Blowfish License
Blowfish License Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com) THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS All rights reserved. IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED This package is an Blowfish implementation written by Eric WARRANTIES OF MERCHANTABILITY AND FITNESS Young (eay@cryptsoft.com).
Page 47: Specifications
Specifications General Recording time: Power requirements: Approx. 128 hours (max.) 12 V DC (11 V - 15 V DC) (using one 32 GB P2 card and recording Input current: 0.9 A at a bit rate of Q-512kbps) indicates a safety related item. Card model Number Recording...
Page 48 Specifications (continued) Recorder Camera Video Image sensor Inputs: 1/4 inch CCD Line (CAMERA connector) x 1 380,000 pixels (effective area) 1.0 Vp-p, 75 Ω, unbalanced Line (Pin jack) x 1 Lens 1.0 Vp-p, 75 Ω, unbalanced Focal length Output: (outputs an original input signal) (optical zoom x22, digital zoom x10) Line (Pin jack) x 1 (without wide conversion lens):...
Page 49: Limited Warranty
It does not cover damage which occurs in shipment or failures which are caused by products not supplied by Panasonic, or failures which result from alteration, accident, misuse, introduction of liquid or other foreign matter into the unit, abuse, neglect,...