Table of Contents
Advertisement
Available languages
Available languages
Hook
The hook is convenient for hanging the tool temporarily.
This hook can be installed on either side of the tool.
CAUTION:
•
Always lock the trigger and disconnect the hose
when hanging the tool using the hook.
•
Always tighten the hook securing bolt firmly. Loose
bolt may cause air leakage from the tool.
•
Never hang the tool on a waist belt or like. Danger-
ous accidental firing may result.
Nails
005614
1. Small rod
1
2. Ejection port
2
005474
1. Hook
1
005616
004310
Handle nail coils and their box carefully. If the nail coils
have been handled roughly, they may be out of shape or
their connector breaks, causing poor nail feed.
Avoid storing nails in a very humid or hot place or place
exposed to direct sunlight.
MAINTENANCE
CAUTION:
•
Always disconnect the air hose from the tool before
attempting to perform inspection or maintenance.
Maintenance of nailer
Always check the tool for its overall condition and loose
screws before operation. Tighten as required.
With tool disconnected, make daily inspection to assure
free movement of the contact element and trigger. Do not
use tool if the contact element or trigger sticks or binds.
7
004311
005617
005477
Advertisement
Table of Contents
