Preface; Audience; Purpose - Cisco uBR905 Installation Manual

Cable access router

Table of Contents

Preface

This document, the Cisco uBR905 Cable Access Router Hardware Installation Guide, describes

installing, powering on, and troubleshooting a Cisco uBR905 cable access router. The document also

includes cabling and pinout information.

This section contains:

•

This guide is intended for coaxial networking transmission installers and technicians who are familiar

with the installation, maintenance, and troubleshooting of cable television wiring and equipment. Cable

system installers and technicians should be familiar with their cable plant's base operating parameters

and subscriber service offerings. Cable system support engineers and administrators should be

acquainted with Ethernet and IEEE 802.3 type data communications networks.

Note

This document contains instructions to install or configure the Cisco uBR905 cable access

router using procedures that only qualified personnel should perform. This document is

not intended for subscribers. See the "Related Documentation" section of this preface for

the documentation available for subscribers.

This guide covers the physical installation of the Cisco uBR905 cable access router. These procedures

include site preparation; the physical placement of the router in an appropriate location; the cabling

required for the power, Ethernet, and cable connections; and verification of the installation at the

router's initial power on.

OL-0598-01 (9/2000)

Audience

Purpose

Organization

Conventions