Cisco uBR905 Installation Manual page 51

Chapter 3 Installing the Cisco uBR905 Router
Figure 3-3
Step 3 Connect the AC power supply cord to the power supply.
Plug the 3-prong end of the power cord into a standard electrical power outlet at the site. Power is
Step 4
immediately supplied to the router. The router is meant to be left on at all times, and therefore, has no
power switch.
Step 5 Turn on the power for all other equipment, and wait for the devices to complete their startup processes.
Caution To turn off the router when it is operational, disconnect the 3-prong end of the power cord
from the power outlet. To prevent electrical shock, do not disconnect the AC power supply
cord from the power supply while the router is operating.
Never defeat the ground conductor or operate the equipment in the absence of a suitably
Warning
installed ground conductor. Contact the appropriate electrical inspection authority or
an electrician if you are uncertain that suitable grounding is available.
Warning Unplug the power cord before you work on a system that does not have an on/off switch.
OL-0598-01 (9/2000)
Connecting the Power Cord
Ethe rnet 0
1
2 3
4
Cabl e TV In
X
X
X X
To AC outlet
Cisc o uBR 905
Powe r
5V
Cons ole
Rese t
Power supply
Cisco uBR905 Router Hardware Installation Guide
Connecting Power
3-7