Table of Contents
Advertisement
Install the pump cover.
4.
Check that the pump cover
s
components are correctly
assembled.
Fit the pump cover and tighten it
5.
as far as it will go.
90°
The pump cover handle must
be vertical.
Install and secure the service cover
6.
click.
1
Close the service door.
7.
2
Cleaning and maintenance NL
17.6 Cleaning the inlet opening
in the rubber sleeve
Regularly check the inlet opening in
the rubber sleeve for blockages and
clean the inlet opening.
Open the appliance door.
1.
Clear the blockages from the inlet
2.
opening.
Remark: Do not use pointed or sharp
objects.
17.7 Cleaning the water drain hose
on the siphon
Turn off the device.
1.
Disconnect the plug of the device
2.
from the mains.
Loosen the hose clamp and carefully
3.
pull off the water drain hose.
Residual water can run!
49
Advertisement
Table of Contents
