Epson PowerLite Presenter Install Manual

PowerLite Presenter
®

Quick Setup

Before using the projector, make sure you read the safety instructions in the
on-screen User's Guide.
Play a DVD
1
Plug in the projector. The
2
Insert your DVD into the slot. The projector will power on automatically.
3
Open the A/V mute slide all the way. Your video will be displayed.
See "Adjust the image" for more information.
Connect the projector
Choose from the following connections:
Computer USB Port (Windows
Connect a computer using a USB cable (not included). You can also connect an
audio cable.
Follow the on-screen instructions to install the Epson USB Display software.
(You need to install the software only the first time you connect.) After the
software has been installed, you will see your computer's screen displayed by
the projector.
*411792400*
*411792400*
power light on the projector turns orange.
® 2000 or later only)
TypeB port
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
If you are using a notebook, switch it to external display. You can also connect
an audio cable.
Other Connections
Connect up to 3 video devices and use the remote control to switch
between them. You can also connect a microphone or USB thumb drive.
RCA video cable
HDMI
cable (composite video)
(optional)
(optional)
Microphone
Turn on your equipment
NOTE: If you're playing a DVD, see "Play a DVD" instead.
1
Turn on your computer or video source.
2
Plug in the projector. The
PC port
Component
Audio cable video cable
(optional) (optional)
USB thumb drive
power light on the projector turns orange.