Auto Power Off Function; Selecting The Menu Screen Position - Sharp AN-K2LP Operation Manual

Using the "Options" Menu

Auto Power Off Function

Menu operation Page 40
Example: "Options" menu screen for
INPUT 1 mode
Description of Auto Power Off
Selectable items
The projector automatically enters the
(ON)
standby mode when no input signal is
detected for 15 minutes or longer.
The Auto Power Off function will be
(OFF)
disabled.
Note
• When the Auto Power Off function is set to "
(ON), 5 minutes before the projector enters the
standby mode, the message "Enter STANDBY
mode in X min." will appear on the screen to
indicate the remaining minutes.
-50
Description
Selecting the Menu Screen
Position
This function allows you to select the desired
position of the menu screen.
Menu operation
Example: "Options" menu screen for
INPUT 1 mode
Description of Menu Positions
Selectable items
Center Displayed on the center of the image.
Upper Right Displayed on the upper right of the image.
Lower Right Displayed on the lower right of the image.
Upper Left Displayed on the upper left of the image.
Lower Left Displayed on the lower left of the image.
"
Position of the Menu Screen which Is
Displayed on the Screen
Upper
Left
Lower
Left
Menu screen
Page 40
Description
Upper
Right
Center
Lower
Right
Screen