NETGEAR RangeMax NEXT WNR834A Reference Manual page 63

Table 6-1. Wireless Router Status Fields (continued)
Field
Wireless Port
Name (SSID)
Region
Channel
Mode
Wireless AP
Broadcast Name
Click on the Connection Status button to display the connection status, as shown below.
Figure 6-2
Maintenance
RangeMax NEXT Wireless Router WNR834A Reference Manual
Description
These parameters apply to the Wireless port of the router.
This field displays the wireless network name (SSID) being used by the
wireless port of the router. The default is NETGEAR.
This field displays the geographic region where the router being used. It
may be illegal to use the wireless features of the router in some parts of
the world.
Identifies the channel of the wireless port being used. See
Communications" in Appendix B
channel. In "Up to 240 Mbps" mode, there are two channels: a primary
channel (P) and a secondary channel (S).
Indicates the router communication mode: 802.11g and 802.11b,
802.11g only, Up To 126 Mbps, or Up To 240 Mbps.
Indicates if the Router Radio feature of the Router is enabled. If not
enabled, the Wireless LED on the front panel will be off.
Indicates if the router is broadcasting its SSID
v1.0, April 2006
for the frequencies used on each
"Wireless
6-3