Storing The Tool; Instructions For Periodic Maintenance - Makita XCU08 Instruction Manual

Always fit a new locking ring when replacing the sprocket.
2
1
► 1. Locking ring 2. Sprocket

Instructions for periodic maintenance

To ensure long life, prevent damage and ensure the full functioning of the safety features, the follow-
ing maintenance must be performed regularly. Warranty claims can be recognized only if this work
is performed regularly and properly. Failure to perform the prescribed maintenance work can lead to
accidents! The user of the chain saw must not perform maintenance work which is not described in the
instruction manual. All such work must be carried out by our authorized service center.
Check item / Operating
time
Chain saw Inspection.
Cleaning.
Check at
authorized
service
center.
Saw chain Inspection.
Sharpening
if necessary.
Guide bar Inspection.
Remove
from the
chain saw.
Chain Check the
brake function.
Have it
inspected
regularly at
authorized
service
center.
Chain Check the
lubrication oil feed rate.
Switch Inspection.
trigger
Lock-off lever Inspection.
Before Everyday
operation
-
-
- -
-
- -
- -
-
- -
-
-
-
NOTICE: Make sure that the sprocket is
installed as shown in the figure.

Storing the tool

1. Clean the tool before storing. Remove any
chips and sawdust from the tool after removing
the sprocket cover.
2. After cleaning the tool, run it under no load
to lubricate the saw chain and guide bar.
3. Cover the guide bar with the guide bar
cover.
4. Empty the oil tank.
Every Every 3
week month
-
-
-
-
-
-
-
-
-
-
-
-
21 ENGLISH
Annually
- -
- -
-
- -
- -
- -
- -
- -
-
- -
- -
- -
Before
storage
-
-
-
-
-
-
-
-
-