important safeguards Warning – This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may Warning be required to take adequate measures. TO REDUCE THE RISK OF FIRE OR Read Instructions –...
internal view 225mm Mounting Point Alternative Mounting Point to Enable Easy Cable Access Entry Glands for Cables 230V Supply Connections Port 1 - DyNet Network Connections Accessory Socket Port 2 - DyNet & DMX Network Connections Knock Out For Port 2 Low Voltage Cable Network Socket Service Switch...
applications The DNG485 can be used for several different applications, some of which are described below: Implementing Trunk/Spur Topology This style of topology is used in large installations, where there is one or more data trunk cables that may interconnect DNG485s located at different floors or distribution boards. The other port on the DNG485 is then connected to a spur that feeds the dimmers and control panels in that locale.
mounting & supply cable connections Select A Suitable Location This device is designed for indoor use only. If installing in an external location, the DNG485 must be housed in a suitable well-ventilated enclosure. Choose a dry location that will be accessible after the installation is complete.
connecting serial control cables Connect Data Cable in a ‘Daisy Chain’ Serial Cable Connections There is one RS485 port for DyNet signals, in the form of a RJ12 socket, on the front panel, which is used for the temporary connection of a PC or a Portable Programmer (DPP601).
troubleshooting Check the following list. If you are still unable to rectify the situation, contact your nearest Dynalite office. A complete list of distributors worldwide can be found on the Internet at: http://dynalite- online.com/html/contacts.htm. Please ensure that you have completed the following prior to calling our technical support department: ...