Makita HB350 Manual page 5

EN
a�ached to a rota�ng part of the tool may result in personal injury.
5. Do not overreach. Keep proper foo�ng and balance at all �mes. Proper foo�ng and balance
enable be�er control of the tool in unexpected situa�ons.
6. Use safety equipment. Always wear eye protec�on. Dust mask, non-skid safety shoes, hardhat,
or hearing protec�on must be used for appropriate condi�ons.
Tool use and care
1.Use clamps or other prac�cal way to secure and support the workpiece to a stable pla�orm.
Holding the work by hand or against your body is unstable and may lead to loss of control.
2.Do not force tool. Use the correct tool for your applica�on. The correct tool will do the job
be�er and safer at the rate for which it is designed.
3.Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
4.Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing the tool. Such preven�ve safety measures reduce the risk of star�ng the tool
accidentally.
5.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the
hands of untrained users.
6.Maintain tools with care. Keep cu�ng tools sharp and clean. Properly maintained tools, with
sharp cu�ng edges are less likely to bind and are easier to control.
7.Check for misalignment or binding of moving parts, breakage of parts, and any other condi�on
that may affect the tools opera�on. If damaged, have the tool serviced before using. Many
accidents are caused by poorly maintained tools.
8.Use only accessories that are recommended by the manufacturer for your model. Accessories
that may be suitable for one tool, maybe come hazardous when used on another tool.
Service
1.Tool service must be performed only by qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in a risk of injury.
2.When servicing a tool, use only iden�cal replacement parts. Follow instruc�ons in the
Maintenance sec�on of this manual. Use of unauthorized parts or failure to follow Maintenance
Instruc�ons may create a risk of electric shock or injury.