3-16 Main Frame Ass'y
1. Before you remove the LSU, you should remove:
- Rear Cover (see page 3-2)
- Cover Rear Ass'y (see page 3-2)
- Scanner Ass'y (see page 3-3)
- Side Cover Ass'y (see page 3-9)
- Exit Ass'y (see page 3-12)
- Cover Paper Exit Ass'y(see page 3-13)
- SMPS (see page 3-15)
- LSU (see page 3-16)
2. Remove one screw in the Channel Base Frame
from the bellow section of the Cover Dummy
Lower, and then remove the rest of the five
screws to dissemble the Dummy Scan Lower.
Front Cover
3. Remove the Locker Deve.
Lock Deve
Samsung Electronics
Dummy Base Frame
Cam Jam Remove
Cover Motor Bracket
4. Unplug the all connectors.
5. Remove the seven screws and take out the
Main Frame Ass'y.
Disassembly and Reassembly
Main Frame Ass'y
3-17