Technical Data - AEG 7000 Series User Manual

42 www.aeg.com
Programmes
Wool/Handwash 30°C
1) «Cotton Energy Saving programme » at 60°C with a load of 8kg is the reference programme for the
data entered in the energy label, in compliance with EEC 92/75 standards.

18. TECHNICAL DATA

Dimension
Electrical connection
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex-
cept where the low voltage equipment has no pro-
tection against moisture
Water supply
Water supply pressure
2)
Maximum wash load
Maximum dry load
Spin Speed
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot
connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your
domestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.
Load
(kg)
1.5
Width/ Height/ Depth/
Total depth
Voltage
Overall power
Fuse
Frequency
1)
Minimum
Maximum
Cotton
Cotton
Synthetics
Maximum
Energy Water con-
consump- sumption (li-
tion (kWh) tre)
0.30 60
597 mm/ 848 mm/ 547 mm/ 576 mm
230-240 V
2200 W
13 A
50 Hz
IPX4
Cold water
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
8 kg
4 kg
3 kg
1600 rpm
Approximate pro-
gramme duration
(minutes)
75