Super Jet Operation; Plasmacluster Operation - Sharp AU-X18UXD Operation Manual

SUPER JET OPERATION

The air conditioner works at the maximum
power and optimum louver direction to
make the room cool rapidly.
1
During operation, press the SUPER
JET button.
• The remote control will display "
• The temperature display will go off.
• The vertical airfl ow louver will be set
obliquely downward.
• The lighting bar will turn to blue.
(For XP10/13UXD, XP10/15UF models only)
TO CANCEL
Press the SUPER JET button again.
• The vertical airfl ow louver will return to the
original direction.
NOTE:
• The air conditioner will operate at "Extra
cooling power" and "Extra HIGH" fan speed
for 15 minutes, then shift to "HIGH" fan speed.
• You can not set the temperature or fan speed
during the SUPER JET operation.
TINSEB026JBRZ.indb EN-8 TINSEB026JBRZ.indb EN-8
".
1
SENSOR
EN-8

PLASMACLUSTER OPERATION

(For Premium models only)
Plasmacluster ions released into the room
will reduce some airborne mold.
1
During operation, press the PLAS-
MACLUSTER button.
• The remote control will display "
• The blue PLASMACLUSTER lamp (
will light up.
TO CANCEL
Press the PLASMACLUSTER button again.
• The blue PLASMACLUSTER lamp (
will turn off.
NOTE:
• Use of the PLASMACLUSTER operation will
be memorized, and it will be activated the next
time you turn on the unit.
• To perform PLASMACLUSTER operation in
FAN only mode, press the PLASMACLUS-
TER button when the unit is not operating.
The lighting bar will turn to cool white
XP10/13UXD, XP10/15UF models only)
The mode symbol of the remote control will
go off and the fan speed cannot be set to
AUTO.
".
)
)
1
SENSOR
(For
.
4/28/2560 BE 2:49 PM 4/28/2560 BE 2:49 PM