Adjusting The Air Flow Direction - Sharp AU-X18UXD Operation Manual

ADJUSTING THE AIR FLOW DIRECTION

VERTICAL AIR FLOW DIRECTION
1
Press the SWING button (
the desired airfl ow direction.
In AUTO mode, airfl ow direction cannot be
set to " ".
TINSEB026JBRZ.indb EN-7 TINSEB026JBRZ.indb EN-7
HORIZONTAL AIR FLOW DIRECTION
(For Premium models)
) to set
1
2
CAUTION:
Never attempt to adjust the louvers manually.
• Manual adjustment of the louvers can cause
• When the vertical adjustment louver is
SENSOR
NOTE:
• The adjustment range is narrower than the
1
(For Standard models)
Hold the horizontal airfl ow louver lever
and adjust the airfl ow direction.
EN-7
Press the SWING button (
• The horizontal airfl ow louver will swing.
• The lighting bar will wave to show the
swing direction.
For more information, refer to page EN-13.
(For XP10/13UXD, XP10/15UF models only)
Press the SWING button (
to stop at the desired position.
the unit to malfunction.
positioned at the lowest position in the COOL
or DRY mode for an extended period of time,
condensation may result.
swing range in order to prevent condensation
from dripping.
Louver lever
).
) again
1
2
4/28/2560 BE 2:49 PM 4/28/2560 BE 2:49 PM