Advertisement
What to do if your codec is not listed
If your codec is not in the list, do the following:
•
Start or restart your codec to activate Pairing visibility mode (a codec is in
Pairing visibility mode for 30 minutes after it is switched on).
•
Alternatively, if you have a codec with a remote control, activate Pairing
visibility mode using the codec menu: Home > Settings > Administrator
settings > Pairing > Activate pairing visibility mode.
If the codec is still not listed, you can enter its IP address manually. Perform
steps i, ii and iii in the
and 6 to the left.
Back
Select codec manually
i.
Tap Select codec manually...
ii.
Enter the codec IP address
or hostname (tap in the
text field to activate the
keypad).
iii.
Tap Start Pairing to start
the pairing process.
Back
Useful hints
•
Remove the protective foil from the display. You may keep the foil for later
reference.
•
Use the rear mounted folding foot to alter the touch screen tilt.
•
Clean the display using the dry cleaning cloth provided.
•
The power adapter can be fastened under a table top with screws (not
included).
•
Use a cable winder (not included) to keep cables neat and organized. The
winder can be placed under a table top.
Select codec manually
Back
Select codec manually...
Back
IP address or hostname
192.168.1.128
— 7 —
frame below instead of steps 5
Select codec to pair with
IP Settings
Manual connection
Start Pairing
Advertisement
