Download Print this page
Cisco TelePresence Touch 8 Installation Manual

Cisco TelePresence Touch 8 Installation Manual

Advertisement

Quick Links

Cisco TelePresence
Touch 8"
installation guide
78-19948-02 | 2011 DECEMBER.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.

Advertisement

loading

Summary of Contents for Cisco TelePresence Touch 8

  • Page 1 Cisco TelePresence Touch 8” installation guide 78-19948-02 | 2011 DECEMBER. Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
  • Page 2: This Box Contains

    This box contains: • Cisco TelePresence Touch 8” with cable (7.5 m / 25 ft) • Power adapter • Power cable (1.8 m / 6 ft) (included when Touch is shipped as a stand-alone unit) • Shielded Ethernet cable (5 m / 16 ft) •...
  • Page 3 Connecting the Cisco TelePresence Touch 8” The Touch 8” can be connected to a range of Cisco TelePresence codecs. There are two options how to connect the Touch controller to the codec. In both cases the connection is via the provided power adapter, as shown in the illustrations.
  • Page 4 Review codec details and tap System name (Codec type) Back Start Pairing to start the name@company.com pairing process. Product: Cisco TelePresence System Codec SIP URI: If required, the touch screen name@company.com H323 id: downloads and installs new name@company.com software from the codec. The Software: TC4.1.0...
  • Page 5 Connecting the touch screen directly to the codec Note: To be able to use this option you need a codec with two Ethernet/LAN connectors. Enable Direct pairing on the codec. Navigate to Home > Settings > Administrator settings > Pairing with the remote control to switch it on, or configure the NetworkPort 2 >...
  • Page 6 Verify that the touch screen is successfully connected to your codec by checking the codec address displayed in the top banner. The touch screen is ready to use. name@company.com The touch screen menu and contact list Change the IP settings If you need to use static IP addresses, contact your network administrator to get the parameters you need for your system.
  • Page 7: Useful Hints

    What to do if your codec is not listed If your codec is not in the list, do the following: • Start or restart your codec to activate Pairing visibility mode (a codec is in Pairing visibility mode for 30 minutes after it is switched on). •...
  • Page 8 On our web site you will find an overview of the worldwide Cisco contacts. Go to: http://www.cisco.com/web/siteassets/contacts. Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Dr. San Jose, CA 95134 USA...