Table of Contents
Advertisement
Connecting a paired Bluetooth
1
Turn on the unit
• Press and hold the power button of this unit for approx. 3 seconds until the
LED (blue) blinks.
• A beep will sound, and the LED (blue) will blink slowly.
2
Perform steps 2 and 3 of "Pairing (Registration) this unit with the
Bluetooth
device for connection" (→ P. 5)
®
• When the LED (blue) blinks twice every approx. 2 seconds, pairing
(registration) is completed. (Connection established)
■
Note
• This unit remembers the device lastly connected. Connection may be
automatically established after step 1 (see above).
• If connection to a device is not established within approximately 5 minutes, the
unit will be turned off. Perform pairing again. (→ P. 5)
How to wear the earphones
The left earphone has the marking point as shown in the illustration.
Marking point
■
Attension
• M-size earpieces are attached at the time of purchase. If they are not the right
size, replace them with S or L-size earpieces (supplied).
device
®
Listening to music
If the Bluetooth
compatible device supports the "A2DP" and "AVRCP" Bluetooth
®
profiles, music can be played back with remote control operations on the unit.
• A2DP (Advanced Audio Distribution Profile): Transmits audio to the unit.
• AVRCP (Audio/Video Remote Control Profile):
Allows remote control of the device using the unit.
1
Connect the Bluetooth
device and the unit (→ P. 5)
®
2
Select and play the music on the Bluetooth
• The selected music is output to the earphones of the unit.
Operating time of battery
Battery type
Rechargeable battery (installed in the unit)
Operating time may be less depending on the operating conditions.
■
Attention
• The unit might leak sound depending on the volume level.
• When the volume is increased to near maximum level, music may sound
distorted. Decrease the volume until the distortion is cleared.
Remote controlling
You can control the Bluetooth
device using the unit.
®
• Depending on Bluetooth
®
devices, some functions below do not work, or work
differently via operation of the unit.
(Operation example)
Play / Pause / Call
Press
Play / Pause / Call
Press twice
Reject the incoming call /
quickly
Switch the calling device
Previous / Next / Volume
Press
Increase the volume
+
Press and
Forward to the start of
hold
next track
Press
Decrease the volume
−
Press and
Return to the start of
hold
current track
■
Note
• The volume can be adjusted in 15 levels.
When the maximum or minimum volume is reached, a beep will sound.
• "Increase/Decrease the volume" function is not available while pause.
®
®
device
Operating time
Approx. 4 hours 20 minutes
Remote controller
Volume + / Next
Play / Pause / Call
Volume – /
Previous
6
Advertisement
Table of Contents
