Bosch Rexroth IndraControl XFE01.1-SY-01 Operating Instructions Manual page 37

IndraControl XFE01.1-SY-01 Safety Ex-
tension Module
LED "Run" LED "Failure"
(Color and status) (Color and status)
Red, flashing Off
Red Green, flashing
Red Green
Green Green
Red, flashing Green
Green, flashing Green
Red Red
Red Red, flashing
Red, flashing Red, flashing
Red, flashing Green, flashing
Green, flashing Red, flashing
Tab. 12-2: Operating state display of the Safety extension module IndraControl XFE01.1-
SY-01
LED Color and status
Mod Off
Green, flashing
Green
Red, flashing
Red
Red/green, flashing Self-test or configuration
Net Off
Green, flashing
Green
Red, flashing
Red
Red/green, flashing Communication error
Tab. 12-3: Special displays for CIP Safety on Sercos
Operating state of the Safety extension module IndraControl
XFE01.1-SY-01
Ready for download.
The Safety extension module IndraControl XFE01.1-SY-01
does not contain any valid application or a download is not
yet completed
Request to press the "Conf" pushbutton
SAFETY STOP
SAFETY RUN
DEBUG STOP
DEBUG RUN or SERVICE RUN
FAILURE STOP
Exceptional state of the Safety extension module
IndraControl XFE01.1-SY-01 due to an internal error. The dif-
ferent displays are used to pinpoint errors
Firmware update is running
Special operating mode for the Bosch Rexroth service em-
ployees
Description
No power supply present or no CSos configuration loaded
Standby state
Normal mode
Error that can be eliminated
Error that cannot be eliminated
No power supply present or no CSos configuration loaded
No valid bus connection
Bus connection OK
Timeout
Critical connection error
R911376654_Edition 04 Bosch Rexroth AG
31/41
Device description