Casio CT-X9000IN User Manual page 100

8.
Press [6] (ENTER).
This displays "Sure?"
9.
Perform the procedure under "To exit the Song
Editing Mode operation" (page EN-95).
To key shift a specified track in measure
units
1.
Perform the procedure under "To enter the
Song Editing Mode" (page EN-95).
2.
Use the [1] (V) and [3] (W) bm number keys
to display "Trk Meas", and then press [6]
(ENTER).
This displays "Quantize".
3.
Use the [1] (V) and [3] (W) keys to display
"KeyShift", and then press [6] (ENTER).
This displays "Trk Sy"
4.
Use bn [–] and [+] or the bl dial to specify the
target track, and then press [6] (ENTER).
This displays "Point A".
5.
Use bn [–] and [+], or the bl dial to select the
number of the first measure of the range you
want to key shift, and then press [6] (ENTER).
This displays "Point B".
6.
Use bn [–] and [+], or the bl dial to select the
number of the last measure of the range you
want to key shift, and then press [6] (ENTER).
This displays "Value".
7.
Use bn [–] and [+], or the bl dial to specify the
key shift setting value.
• You can specify a value of the range of –24 to 24.
Lowering the setting value by one lowers the pitch by
one semitone, while raising the value raises the pitch.
8.
Press [6] (ENTER).
This displays "Sure?"
9.
Perform the procedure under "To exit the Song
Editing Mode operation" (page EN-95).
Using the MIDI Recorder to Record
To delete a specified track in measure units
1.
Perform the procedure under "To enter the
Song Editing Mode" (page EN-95).
2.
Use the [1] (V) and [3] (W) bm number keys
to display "Trk Meas", and then press [6]
(ENTER).
This displays "Quantize".
3.
Use the [1] (V) and [3] (W) keys to display
"Clear", and then press [6] (ENTER).
This displays "Trk Sy"
4.
Use bn [–] and [+] or the bl dial to specify the
target track, and then press [6] (ENTER).
This displays "Point A".
5.
Use bn [–] and [+], or the bl dial to select the
number of the first measure of the range you
want to delete, and then press [6] (ENTER).
This displays "Point B".
6.
Use bn [–] and [+], or the bl dial to select the
number of the last measure of the range you
want to delete, and then press [6] (ENTER).
This displays "Sure?"
7.
Perform the procedure under "To exit the Song
Editing Mode operation" (page EN-95).
EN-99