Honeywell LYNX Touch L5210 Series Manual page 4

Home Automation
Z-Wave® Programming
LYNX Touch Automation Screen (Page 1)
LYNX Touch Automation Screen (Page 2)
Z-Wave Device Management Screen
Button
Switches Provides access to the Switches Screen
Thermostats Provides access to the Thermostats Screen
Locks Provides access to the Locks Screen
Garages Provides access to control Garage Door operation.
Water Valves Provides Access to control Water Valve operation.
Displayed only when device failures have been detected in the
Press to see
Z-Wave network (Refer to the Failed Device section for
Failed devices
additional information).
Use the down  arrow to scroll to the next page.
Button
Provides access to the Scenes Screen. Scenes are used to
control a single or group of devices, turning them Off/On, to a
Scenes
preset level, temperature or mode. Up to 20 scenes can be
programmed.
Provides access to the Schedules Screen. Schedules are used
Schedules to activate Scenes based on a specified time and repeat
frequency.
Provides access to the Rules Screen. Rules are used to
Rules automate Z-Wave devices based on specified Zone Activity,
Alarm Status or Alarm Conditions.
Provides access to the Z-Wave Device Management Screen
Tools
and Advanced Tools option.
Garage door
Provides access to program/enroll Garage Door Openers.
setup
Provides access to control Unknown or Unsupported Devices.
Basic On/Off commands are included. The action or response
to this command is implemented by the Device Manufacturer.
Other Devices
Note: Z-Wave devices that appear in the "Other Devices"
category are not supported and are not deemed to be
interoperable in LYNX Touch Z-Wave system."
Button
Include Devices Enroll Z-Wave Devices/Modules
Exclude Devices Delete Z-Wave Devices/Modules
View Failed Devices Displayed only when device failures have been detected
in the Z-Wave network (Refer to the Failed Devices
section for additional information).
Advanced Tools Provides access to additional Z-Wave options
- 4 -
Function
Function
Function