16
4
Loading Material
2.2
Loading Fanfold Labels
Fig: 9
1.
Position label stack (5) behind the printer.
2.
Turn ring (4) counterclockwise, so that the arrow points to the symbol
gin stop (3). Leave the margin stop on the roll retainer (7).
3.
Push the inner margin stop (2) against the chassis (1) until it stops. Thus the other margin stop (3)
will be moved outwards.
4.
Push label strip between the margin stops (2,3) to print unit via the roll retainer (7). Ensure that the
labels on the strip are visible from above.
5.
Push the outer margin stop (3) until both margin stops (2, 3) touch the label strip (6) without clamping
or bending it.
6.
Turn ring (4) clockwise, so that the arrow points to the symbol
the roll retainer.
7.
Insert label strip into printhead ( 4.1.2 on page 13).
8.
Set label sensor ( 4.1.3 on page 13).
Loading fanfold labels
, and thus release the mar-
, and thus fix the margin stop (3) on
16