Black & Decker Price Pfister Catalina 536 Series Manual page 3

7
7C
7A
7B
7 ATTACHING WEIGHT
Your faucet includes a Weight (7A) which is not required, but will help to retract the hose
during pull-out operation. Insert the end of the Pull-Out Hose (7B) into the Weight (7A).
Screw Quick Connector (7C) to the free end of Pull-Out Hose (7B).
8
8C
8A
8B
8 PULL-OUT HOSE CONNECTION
From underneath sink, push Quick Connect Housing (8A), located on the end of the Pull-
out Hose (8B), fi rmly upward onto the receiving Tube (8C), until unable to push any further.
Pull down on the quick connect housing (8A). If the housing and the Inner Collet (8D)
separate slightly but do not pull off the receiving Tube (8C), quick connect is secure.
9
9B
9A
HOT
9 WATER SUPPLY CONNECTIONS
Connect water Supply Lines (9A) to Faucet Inlets (9B). Hot water supply lines go into left
inlet. Cold water supply lines go into right inlet. (Supply lines are not included). Please
follow manufacturer's instructions when installing suppy lines.
8D
8C
8A
8A
8B
9B
9A
COLD
ENGLISH
SOAP DISPENSER INSTALLATION
10
10 SOAP DISPENSER INSTALLATION
(For 4 hole instelation models only).
Insert threaded Shank (10A) of soap dispenser body through Foam Gasket (10B) and
sink hole. Tighten Nut (10C) and thread on Bottle (10D).
11
11 SOAP DISPENSER HEAD INSTALLATION
Pour in liquid soap (not included) into the Shank Orifi ce (11A). Insert Pump Mechanism
(11B) into soap dispenser body. Install Dispenser Head (11C) by pushing fi rmly onto
dispenser mechanism.
3
10A
10B
10C
10D
11C
11B
11A