Faucet Installation - Black & Decker Price Pfister Catalina 536 Series Manual

Kitchen pull-out faucet
Table of Contents

Advertisement

Available languages

Available languages

Thank you for purchasing this Price Pfi ster product. All Price Pfi ster products are carefully engineered, and factory tested to
provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Price Pfi ster
recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found
under the sink or near the water meter. If you are replacing an existing faucet, remove
the old faucet from the sink and clean the sink surface thoroughly.
3
3 TOOLS RECOMMENDED
• PTFE plumber's tape or thread sealant
Slotted screwdriver
• Philips head screwdriver
• Adjustable wrench
• Flashlight
Your installation may require new supply lines and / or shut-off valves or other additional
tools.
4
E
F
4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are included.
A Faucet
B Pull-out Hose
E Soap Dispenser (for product with 4 hole installation only)
If any of these items are missing, please contact Price Pfi ster Consumer Service at
1-800-Pfaucet (1-800-732-8238).
• Plumber's putty
• Pliers
• Cloth
A
C
B
D
C Wingnuts (2x)
D Weight
F Quick Connector
ENGLISH
This product comes with or without a Soap Dispenser.
(Refer to steps 9 & 10 for soap dispenser Installation)

FAUCET INSTALLATION

5
PUTTY GROOVE
5B
5 FAUCET INSTALLATION
Following manufacturer's recommendations on use, apply plumber's putty into putty
groove in Bottom Plate (5A). Insert the faucet Pull-out Hose (5B) through the center
hole of the sink. Insert faucet Shanks (5C) through the end holes of the sink.
6
6A
6 SECURING FAUCET
Align Faucet (6A) to sink surface. From underneath sink, secure faucet using Wingnuts
(6B). Hand tighten.
2
5A
5C
6B
6B
6B
6A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents