Advertisement
TECHNICAL DATA
Rated voltage
Stroke rate under no-load
Lengths of stroke
Maximum cutting capacity
In wood
In steel
In PVC pipe
Weight - not including battery pack
BATTERY AND CHARGER
Compatible battery pack
(not included)
L1815R
L1820R
L1825R
L1830R
L1840R
L1850R
L1860R
L1860B
Use AEG 18V battery and charger only
WARNING!
Read all safety warnings, instructions, illustrations and
or serious injury.
SAFETY INSTRUCTIONS FOR RECIPROCATING SAWS
Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a "live" wire
may make exposed metal parts of the power tool "live" and could
give the operator an electric shock.
Use clamps or another practical way to secure and support the
workpiece to a stable platform. Holding the workpiece by hand or
against your body leaves it unstable and may lead to loss of control.
Wear ear protectors. Exposure to noise can cause hearing loss.
Always wear goggles when using the machine. It is recommended
to wear gloves, sturdy non slipping shoes and apron.
Sawdust and splinters must not be removed while the machine is
running.
Always use the protective shields on the machine.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Wear a suitable dust protection mask.
Do not use cracked or distorted saw blades.
Plunge cuts without pre-drilling a hole are possible with soft
materials (wood, light building materials for walls). Harder materials
of the saw blade.
Always place the guide shoe on the workpiece when sawing.
cables and gas or water pipes.
Ambient temperature range for tool during operation is between 0°C
and 40°C.
Ambient temperature range for tool storage is between 0°C and
20
BRUSHLESS RECIPROCATING SAW
Compatible charger
(not included)
AL1218G
BL1218
BLK1218
BL18DP-X5
Failure to follow
20°C.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING!
to a short circuit, never immerse your tool, battery pack or charger
bleach containing products, etc., can cause a short circuit.
Do not dispose of used battery packs in the household refuse or
by burning them. AEG Distributors offer to retrieve old batteries to
protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System GBS chargers for charging System GBS battery
packs. Do not use battery packs from other systems.
No metal parts must be allowed to enter the battery section of the
charger (short circuit risk).
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
it off immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
The recommended ambient temperature range for the charging
system during charging is between 10°C and 38°C.
Ambient temperature range for battery during use is between 0°C
and 40°C.
Ambient temperature range for battery storage is between 0°C and
20°C.
SPECIFIED CONDITIONS OF USE
This reciprocating saw is intended to cut wood, plastic, and metal. It
can cut straight lines, curves, and internal cut-outs. It cuts pipes and
20
BUS18B
18 V
0-3100 min
-1
28.5 mm
255 mm
20 mm
130 mm
3 kg
Advertisement
