Sony NUA-BK30 Instructions For Use Manual page 26

Attaching the IP Converter
to the Monitor Bracket
Notes
• First, remove the monitor from the
ceiling suspension arm.
• When attaching the bracket to the
monitor, place the monitor on a soft
cloth with the screen facing down.
1
Remove the four IP converter
bracket M4 screws (large), and
separate the monitor bracket and
arm bracket.
The removed screws are used in
"Attaching the Monitor
step 1 of
Bracket and Arm Bracket"
(page 14)
and step 3 of
the Arm Bracket" (page 9)
8
Mounting
GB
2
3
"Attaching
.
Align the four M4 screw holes of
the monitor bracket with the
screw holes on the back of the
monitor, and attach the bracket
using four supplied M4 screws
(large).
Insert the IP converter into the
monitor bracket so that the
connectors face downwards,
align the four M3 screw holes on
the sides of the IP converter and
monitor bracket, and attach the IP
converter using four supplied M3
screws (small).