Isp Instructions - Philips 170B6CS/75 Service Manual

32
170B6 LCD
Go to cover page
Configuration and procedure
"Easywriter " The software is provided by Novatek to upgrade the
firmware of CPU.
It is a windows-based program, which cannot be run in MS-DOS.
DDC2BI_ISP TOOL (3138 149 53161) is for the interface between
"Parallel Port of PC" and "15 pin-D-SUB connector of Monitor".
System and equipment requirements
1. An i486 (or above) personal computer or compatible.
2. Microsoft operation system Windows 95/98/2000/XP.
3. ISP Software " Easywrite "
4. DDC2BI_ISP TOOL (3138 106 10396)
Parallel Port to Print Port in PC
5. Connect DDC2BI_ISP TOOL
in Fig. 2.
Monitor (A)
Connect to
Mains cord
Video cable
Fig.2
6. Install and setup the Easywriter program
Step 1 : Make a folder in your PC as shown in Fig. 3.
For example : C:\170B6
Step 2 : Copy ISP Software Easywriter
as shown in Fig.3.
Step 3 : Unzip Easywriter.zip into your folder as shown in Fig. 3.
Step 4 : Double click the EasywriterV2.09a_user.exe icon to install the
Application as Fig. 4.

ISP Instructions

as shown in Fig. 1
D-SUB to monitor
Fig. 1
and Mains cord to Monitor as shown
PC
170B6 -Monitor (B)
D-Sub
Connect to Mains
cord at this moment.
ISP box
.zip into your folder
Fig. 3
Step 5 :Copy the 313811707781_141_F1AD to C:\170B6 as shown in
Fig. 5 .
Update the firmware
1. Double click the Easywriter.exe icon in desktop then appears
window as shown in Fig.7 .
2. Press the Load hex then select the V200.hex as shown
in Fig. 8.
3. From the menu that appears, choose the "NT68F633(64K)" as
shown in Fig. 9.
Fig. 4
Fig. 5
Fig. 6
Fig. 7