Fuel Tank Removal / Installation - Polaris RZR PRO XP 2020 Service Manual

EFI / FUEL SYSTEM

FUEL TANK REMOVAL / INSTALLATION

FUEL TANK REMOVAL
NOTICE
Syphon as much fuel from the tank as possible before
attempting to remove it from the vehicle.
Always wear safety goggles when working with high
pressure or flammable fluids. Failure to do so could
result in serious injury or complications.
1. Remove the driver and passenger seats.
2. Remove upper and lower rear close off panels.
3. Disconnect the negative
cables from the battery, located under the driver's
seat.
4. Remove the battery bracket fasteners and remove
the battery from the vehicle.
5. Remove the lower floor panels. See Console and
Lower Floor Removal page 11.21.
6. Disconnect the fuel pump electrical harness.
5.22
WARNING
q w
and positive battery
7. While holding a shop towel over the fuel line
connectors, disconnect fuel supply line
r
vent line from the fuel tank.
NOTICE
A small amount of fuel may come out of the fuel lines or
pump fitting. Properly drain fuel into a suitable
container.
8. Remove two fasteners
y
strap .
9930583 R02 - 2020 RZR PRO XP / XP 4 Service Manual
e
and fuel
t
and remove the fuel tank
© Copyright Polaris Industries Inc.