Head Pipe / Turbo Removal - Polaris RZR PRO XP 2020 Service Manual

ENGINE / COOLING SYSTEM

HEAD PIPE / TURBO REMOVAL

1. Remove the exhaust pipe. See Exhaust Pipe
Removal page 3.16 outlined in this chapter.
q
2. Remove two hoses
boost control valve.
3. Remove the banjo bolt
and remove the oil drain hose
IMPORTANT
The oil line sealing washers MUST be replaced any
time the oil line/fitting is removed. Use only the
recommended washers shown in the Polaris Electronic
Parts Catalog.
4. Remove two fasteners
t
inlet hose and outlet hose
5. Remove two fasteners
the turbo.
3.18
from the turbo going to the
w
retaining the oil inlet hose
e
.
r
and remove the coolant
y
.
u
retaining turbo bracket to
6. Loosen four fasteners
bracket and pivot the top of the turbo bracket forward.
7. Remove two fasteners
heat shield.
8. Remove six fasteners
the cylinder head.
9930583 R02 - 2020 RZR PRO XP / XP 4 Service Manual
i
on the engine mounting
o
and remove the lower turbo
a
retaining the head pipe to
© Copyright Polaris Industries Inc.