Electrical Safety - Black & Decker JC250 Manual

ENGLISH
•
Do not allow children or animals to come
near the work area or to touch the appliance
or power supply cord.
•
Close supervision is necessary when the
appliance is used near children.
After use
•
Remove the plug from the socket and let the
appliance cool down before leaving it
unattended and before changing, cleaning or
inspecting any parts of the appliance.
•
When not in use, the appliance should be
stored in a dry place. Children should not
have access to stored appliances.
Inspection and repairs
•
Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts and any other conditions
that may affect its operation.
•
Do not use the appliance if any part is
damaged or defective.
•
Have any damaged or defective parts
repaired or replaced by an authorised repair
agent.
•
Before use, check the power supply cord for
signs of damage, ageing and wear.
•
Do not use the appliance if the power supply
cord or mains plug is damaged or defective.
•
If the power supply cord or mains plug is
damaged or defective it must be repaired by
an authorised repair agent in order to avoid a
hazard. Do not cut the power supply cord
and do not attempt to repair it yourself.
•
Never attempt to remove or replace any
parts other than those specified in this
manual.
4

Electrical safety

This product must be earthed. Always
check that the power supply
corresponds to the voltage on the
rating plate.
If the supply cord is damaged, it must be
replaced by the manufacturer or an authorised
Black & Decker Service Centre in order to avoid
a hazard.
Mains Plug Replacement
If a new mains plug needs to be fitted:
•
Safely dispose off the old plug.
•
Connect the brown lead to the live terminal of
the new plug.
•
Connect the blue lead to the neutral terminal.
•
If the product is class l (earthed), connect the
green / yellow lead to the earth terminal.
Warning! If your product is class ll double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs.
Any replacement fuse must be of the same rating
as the original fuse supplied with the product.
Extension cables & Class l
product
A 3-core cable must be used as your appliance is
earthed and of Class l construction.
Up to 30m (100 ft) can be used without loss of
power.
To avoid the risk of electric shock, do
not immerse the cord, plug or
appliance in water or other liquid.