Advertisement
Operation Mode Navigation
Menus in Operation Mode are easy to step through
by pressing the [N/-] key.
Notes:
If the instrument is not equipped with a VOC
sensor (PID), or is not equipped with an LEL
sensor, then screens for those sensors (VOC
Gas Status and LEL Gas Status, respectively)
are not shown.
If ISM or Wi-Fi is not the primary modem, its
menu is not displayed.
The first gray box indicates the datalog
functions when datalogging is in Manual
mode. When datalogging is in Automatic
mode, this screen does not appear. Refer to the
User's Guide for information on selecting
Automatic or Manual datalogging.
The dashed line indicates automatic
progression.
The AreaRAE Plus/Pro has three keys:
Y/+
MODE
In addition to their labeled functions, [Y/+],
[MODE], and [N/-] act as "soft keys" that control
different parameters and make different selections
within the instrument's menus. From menu to
menu, each key controls a different parameter or
makes a different selection.
Press any key when the backlighting is off to turn it
on. A subsequent key press is required to carry out
an actual function corresponding to that key.
N/-
17.
Advertisement
