Advertisement
First Aid
In case of accident make sure that a first-aid
1.
box is available in the vicinity of the cutting
operations. Immediately replace any item
taken from the first aid box.
2.
When asking for help, give the following
information:
Place of accident
—
—
What happened
—
Number of injured persons
Kind of injuries
—
—
Your name
Additional safety instructions
1.
Only use the dedicated cutting blade for
Rotary Scissors Attachment.
2.
Only use the cutting tools that are marked with
a speed equal or higher than the speed marked
on the machine.
3.
Inspect and maintain the machine regularly,
especially before/after use. Have the machine
repaired only by our authorized service center.
4.
Before operation, make sure that the shoulder
harness is properly attached to the hanger on
the machine.
5.
Remove any adjusting key or wrench before
turning the machine on. An accessory left
attached to a rotating part may result in personal
injury.
6.
Be sure to remove the cover on the cutting
blade before operation.
7.
Make sure there are no electrical cables, water
pipes, gas pipes etc. that could cause a hazard
if damaged by use of the machine.
PARTS DESCRIPTION
► Fig.3
1
Cap
5
Gear case access bolt
9
Holder (for lower blade)
13
Hex wrench
2
Pipe
6
Holder (for upper blade)
10
Clamp washer
14
Box wrench
8.
Do not operate the machine in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Machine create sparks
which may ignite the dust or fumes.
9.
Do not use the machine in damp or wet loca-
tions or expose it to rain. Water entering the
machine will increase the risk of electric shock,
fire, and malfunction.
10. Do not use the machine on steep slopes and
slippery surface.
11.
To avoid accident, leave more than 15m (50 ft)
distance between operators when two or more
operators work in one area. Also, arrange a
person to observe the distance between oper-
ators. If someone or an animal enter the work-
ing area, immediately stop the operation.
12. Do not touch the gear case during and imme-
diately after the operation. The gear case
becomes hot during operation and can cause burn
injury.
13. Keep fingers away from switch trigger when
not operating the machine and when moving
from one operating position to another.
WARNING:
dust containing chemicals which may cause
respiratory or other illnesses. Some examples of
these chemicals are compounds found in pesti-
cides, insecticides, fertilizers and herbicides.
Your risk from these exposures varies, depend-
ing on how often you do this type of work. To
reduce your exposure to these chemicals: work
in a well ventilated area, and work with approved
safety equipment, such as those dust masks that
are specially designed to filter out microscopic
particles.
SAVE THESE INSTRUCTIONS.
3
Gear case
7
Upper blade
11
Bolt
-
-
12 ENGLISH
Use of this product can create
4
Protector
8
Lower blade
12
Blade cover
-
-
Advertisement
