Resending The Study Images - Canon CXDI-1 Operation Manual

6.5.2 Resending the Study Images

Follow the procedure below to resend all the images contained in a study.
1
2
3
4
Open the RESEND ALL window.
Touch [RESEND ALL].
Select the device for sending the image.
Touch [ON]/[OFF] next to the name of the destination and select [ON] for the device for
sending the image.
However, [ON]/[OFF] will not be displayed for devices that have not been set as the
output destination (→ Setup Guide).
Set the priority.
Each time you touch [Priority], the button switches between highlighted display (white
characters) and normal display. The selected study is given output priority when this
button is highlighted.
Resend the study.
Touch [RESEND ALL].
If all images contained in a study are rejected
If you touch [RESEND] or [RESEND ALL] after all images contained in a study were
rejected (→ page 40), a window will open and the confirmation message "All the
selected images are the rejected images. They can only be sent to the internal
storage. Do you want to continue?" will be displayed.
If you touch [OK], the IMAGE DESTINATION window will open and you will be
able to make the [ON]/[OFF] setting to select internal storage as the output destination.
6. Browsing Completed Studies (Study List)
RESEND ALL Window
– 61 –