Contents 1 Important 4 Use your Soundbar Help and support Turn ON and OFF Safety Auto Standby Care for your product Select Modes Care of the environment Adjust the Volume Caution FCC and IC statement for Select Equalizer (EQ) Effect Users (USA and Canada only) Adjust the Bass/Treble Level Compliance...
• Disconnect the product from the power For extensive online support, visit outlet before lightning storms. www.philips.com/welcome to: • When you disconnect the power cord, • download the user manual and the quick always pull the plug, never the cable.
Care for your product • space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Care of the environment • Do not mix batteries (old and new or Disposal of your old product and battery carbon and alkaine, etc.).
FCC Rules. These limits are designed to relevant provisions of Directive 2014/53/EU. provide reasonable protection against harmful interference in a residential installation. This www.p4c.philips.com. equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
2 Your Soundbar e Remote Control Sensor f Display panel Congratulations on your purchase, and Wireless subwoofer the support that Philips offers, register your Soundbar at www.philips.com/welcome. This section includes an overview of the Wireless subwoofer. Main unit This section includes an overview of the main unit.
j Bass Activate bass setup. k Treble Activate treble setup. Connectors This section includes an overview of the connectors available on your Soundbar. HDMI OUT (ARC) HDMI 1 HDMI 2 OPTICAL HDMI OUT (ARC) HDMI 1 HDMI 2 OPTICAL (Previous/Next) Skip to the previous or next track in USB/ BT mode.
Precautions Concerning Batteries Prepare the Remote Control • When the Remote Control is not to be • The provided Remote Control allows the used for a long time (more than a month), unit to be operated from a distance. remove the battery from the Remote Control to prevent it from leaking.
3 Connect Note • The full Dolby Atmos experience is only available when the Soundbar is connected to the source via a HDMI 2.0 cable. This section helps you connect your Soundbar • The Soundbar will still function when connected via to a TV and other devices, and then set it up.
Using an optical cable, connect the Note OPTICAL connector on your Soundbar to the OPTICAL OUT connector on the TV • Your TV must support the HDMI-CEC and ARC or other device. function. HDMI-CEC and ARC must be set to On. •...
Manual Pairing • Connect the mains cable to the AC~ Socket of the unit and then into a mains socket If no audio from the wireless subwoofer can be • Connect the mains cable to the AC~ heard, manually pair up the subwoofer. Socket of the subwoofer and then into a Unplug both units from the mains sockets mains socket.
4 Use your Select Modes Soundbar Press the button repeatedly on the unit or press the Source button on the remote control to select the AUX, OPTICAL, This section helps you use the Soundbar to play HDMI ARC, HDMI 1, HDMI 2, BT, USB audio from connected devices.
» NO BT is displayed on the display panel. Dolby sound mode On the Bluetooth device, switch on Bluetooth, search for and select PHILIPS Experience an immersive audio experience with TAPB603 to start connection (see the user Dolby sound modes.
• If your Bluetooth device supports you can press to skip to a • While in OPTICAL/HDMI ARC mode, if there’s no /Pair to pause/ sound output from the unit and the status Indicator track, or press PCM or Dolby Digital resume play.
5 Wall mount Note • Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. • Before wall mounting, make sure the wall can support the weight of your Soundbar. •...
Page 16
6 Product Subwoofer specifications • Power Supply: 100-240 V~, 50-60 Hz • Output Power: 120 W • Power Consumption: 20 W • Standby power consumption: < 0.5 W Note • Frequency Response: 40Hz - 120Hz • Impedance: 3 Ω • •...
• Replace the battery. If you still have a problem, get support at • Aim the remote control directly at the www.philips.com/welcome. sensor on the front of the unit. No power unit on my Bluetooth device • Ensure that the AC cord is properly •...
Page 18
Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. Philips and Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under...