Home >
Copy
> Copy an ID Card
Copy an ID Card
Use the [2in1(ID)] feature to copy both sides of an identification card onto one page, keeping the original
card size.
•
Make sure the paper size is set to A4 or Letter.
•
You may copy an identification card to the extent permitted under applicable laws. For more detailed
information, see the Product Safety Guide.
>> DCP-J1050DW/MFC-J1010DW
>> DCP-J1140DW
DCP-J1050DW/MFC-J1010DW
1. Place your identification card face down near the upper-left corner of the scanner glass.
2 in 1 ID (Vertical)
a
a
d
b
a. 3 mm or greater (top, left)
b. 145 mm
c. 2 in 1 ID (Vertical): 207 mm
2 in 1 ID (Horizontal): 102 mm
d. Scannable area
2. (MFC-J1010DW) Press
3. (MFC-J1010DW) Enter the number of copies using the dial pad.
4. (DCP-J1050DW) Press - or + on the control panel.
5. Press a or b to select the following:
a. Select [Page Layout]. Press OK.
b. Select [2in1 ID Vertical] or [2in1 ID Horizontal]. Press OK.
6. Press Mono Start or Colour Start.
The machine starts scanning one side of the identification card.
c
(COPY).
2 in 1 ID (Horizontal)
a
a
d
b
c
131