Warranty And Support - Philips Colgate SonicPro Manual

18
English

Warranty and support

4 Insert the screwdriver into the gap and pry the
bottom cap out of the handle.
5 Hold the handle upside down and push down on
the shaft to release the internal components of the
handle.
6 Insert the screwdriver under the circuit board, next
to the battery connections, and twist to break the
connections. Remove the circuit board and pry the
battery from the plastic carrier.
7 Grab the battery and pull it away from the internal
components to break the second metal battery
tab.
Caution: Be aware of the sharp edges of the
battery tabs so as to avoid injury to your fingers.
8 Cover the battery contacts with tape to prevent
any electrical short from residual battery charge.
The rechargeable battery can now be recycled and
the rest of the product discarded appropriately.
Note: Do not throw away the appliance with the
normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By
doing this, you help to preserve the environment.
If you need information or support, please visit
www.philips.com/support or read the international
warranty leaflet.