Hardware Installation - Draytek Vigor 5510Gi User Manual
Vigorpro 5510 series unified security firewall
Hide thumbs
Also See for Vigor 5510Gi:
- Specifications (2 pages) ,
- Declaration of conformity (1 page) ,
- Quick start manual (56 pages)
Table of Contents
Advertisement
1
.
3
H
a
r
d
w
a
r
e
1
.
3
H
a
r
d
w
a
r
e
Before starting to configure the router, you have to connect your devices correctly.
1.
Connect a cable Modem/DSL Modem/Media Converter (depends on your requirement)
to any WAN port of router with Ethernet cable (RJ-45). The WAN1/WAN2 LED (Left
or Right) will light up according to the speed (100 or 10) of the device that it
connected.
2.
Connect one end of an Ethernet cable (RJ-45) to one of the LAN ports of the router and
the other end of the cable (RJ-45) into the Ethernet port on your computer. The LAN
LED (Left or Right) will light up according to the speed (100 or 10) of the device that it
connected.
3.
Connect one end of the power adapter to the router's power port on the rear panel, and
the other side into a wall outlet.
4.
Power on the device by pressing down the power switch on the rear panel.
5.
The system starts to initiate. After completing the system test, the ACT LED will light
up and start blinking.
(For the detailed information of LED status, please refer to section 1.2.)
6
I
n
s
t
a
l
l
a
t
i
o
n
I
n
s
t
a
l
l
a
t
i
o
n
VigorPro5510 Series User's Guide
Advertisement
Table of Contents
